Thermal gas mass flow controller, to 200 sccm Air / N2, Aluminum body w/ display
- Compact Gas Mass Flow Controllers
- Precisely control flow rates with a built-in valve
- Proven design uses metal body components for added durability
- Accumulated flow can be logged using an optional totalizer
- Includes NIST-traceable certificate
- Description: Mass Flowmeter
- Dimensions: 4″Wx5-5/8″Hx1″D
- Accuracy: ±1.5% full-scale including linearity (see below for details)
- Max operating temperature (° F): 122
- Max operating temperature (° C): 50
- Max pressure: 500 psi
- Max particulate size: 5 microns
- NIST-certified: Yes
- Output: 0 to 5 VDC (1000 ohm minimum); linear 4 to 20 mA (50 to 500 ohm loop resistance)
- Power: 12 VDC; 1100 mA max; polarity protected
- Pressure drop at maximum flow: 1.25 psi
- Process connection: 1/4″ compression fittings
- Repeatability: ±0.5% full-scale
- Fluid Type: Viscous
- Model: GFCS-010481
- Manufacturer number: GFCS-010481
- Part Number: AO-32660-08
- Package Quantity: EACH
These controllers feature an advanced straight-tube sensor that ensures accurate and repeatable results. Gas flow measurements are unaffected by moderate temperature and pressure variations at the inlet. The meter also allows a four-point calibration across the flow range to improve meter linearity. The flow rate set point can be established by either a local potentiometer or by a remote 4 to 20 mA or 0 to 5 VDC signal. Output data is sent via a 0 to 5 VDC or 4 to 20 mA signal; an analog-to-RS converter is also available for data collection and analysis on your PC. All controllers include a detachable 31/2-digit LCD that can be tilted up to 90° for easy reading. The display is remote mountable to three feet using extension cable 32662-70. The totalizer option 32650-70 will display total accumulated flow. The controller is protected from polarity reversal or short circuit by a built-in resettable fuse. Aluminum models have wetted materials of anodized aluminum, brass, and Viton®; stai
List Price: $ 852.00
Price:


0 responses so far ↓
There are no comments yet...Kick things off by filling out the form below.
Leave a Comment